Site-ready IVMS
and GPS tracking for Western Australian fleets

Minesite-compliant in-vehicle monitoring, GPS fleet tracking and driver fatigue cameras for light and heavy vehicles. Fitted by experienced installers, configured for the site you are going to, and backed by people who answer the phone.

  • Mine-spec configuration
  • No lock-in contracts
  • Perth-based support


What we fit

Vehicle monitoring built for WA conditions

IVMS and GPS vehicle tracking

  • Live GPS tracking and full trip history
  • Seatbelt monitoring with in-cab warning
  • Rollover and impact detection
  • 4G with automatic satellite fallback
  • Speed, harsh braking and cornering
  • Driver ID by tag, card, keypad or QR code
  • Geofenced site speed zones
  • Electronic pre-start checklists


Suits: utes, light vehicles, trucks, buses and mobile plant

IVMS 4G · GNSS · Sat GPS antenna Driver ID Seatbelt input In-cab buzzer

DFDM fatigue and distraction cameras

  • Infrared camera, works at night
  • Phone use and distraction alerts
  • Event video sent to supervisors
  • Works through most sunglasses
  • Eye closure and microsleep detection
  • Immediate audible in-cab alarm
  • Optional 24/7 monitoring
  • Fatigue management reporting


Suits: Mine site access, long-haul transport and shift work


AI dashcams and video telematics

  • Forward collision warning (ADAS)
  • Tailgating and following distance
  • Live video from the office
  • Lane departure alerts
  • Up to 8 cameras on heavy vehicles
  • Footage for insurance and incidents


Suits: Transport, civil, service fleets and heavy vehicles

Not just vehicles. If you need to know where it is, we have a tracker for it.

Trailers and dollies

Plant and machinery

Gensets and light towers

Containers and site huts

Tools and equipment

Remote assets

How fatigue cameras work

What happens in the two seconds that matter

0.0 seconds

Eyes close

About 1.5 seconds

In-cab alarm

Seconds later

Clip uploaded

Minutes later

Supervisor acts

DetectsMicrosleepYawningEyes off roadPhone useSmokingCamera coveredNo driver detectedAnd plenty more

Site compliance

Minesite-compliant, signed off and
through the gate

Every mine site has its own IVMS and DFDM access standard, and a vehicle that does not meet it is turned around at the gate. We set up each system to the specification of the site it is travelling to, including Tier 1 miner requirements, and hand over the paperwork your site contact needs.

Requirements vary between operators and change from time to time. Tell us which site the vehicle is going to and we will confirm the current standard before we quote.

Typical site access checklist

Light and heavy vehicles

Approved IVMS fitted and reporting

Mine-spec unit configured to site parameters and tested before it leaves our workshop.

Driver identification

Driver ID by tag, card, keypad or QR code scan, with no-ID alerts and optional immobilisation.

Speed management and site speed zones

Geofenced speed profiles with in-cab overspeed warnings that match site limits.

Seatbelt, harsh driving and rollover events

Calibrated accelerometer and seatbelt input, with audible in-cab feedback.

Fatigue and distraction monitoring

Infrared driver-facing camera with real-time alarm and event video.

Data access for the site operator

Reporting access or scheduled exports, as the site standard requires.

Install evidence and compliance documents

Install photos, configuration record and compliance letter for every vehicle.

Why fleets switch

The hardware is easy to buy. The service is not.

Most fleet tracking providers sell a good product. Where it usually falls apart is
after the sale. These are the complaints we hear most from fleets moving
across to us, and what we do instead.

The usual experience

A support line in another state, with a ticket number and a wait

Three to five year contracts that are hard to leave

Quotes that take weeks, with costs that only appear later

Subcontracted installers who have never seen a site standard

Vehicles turned away at the gate because a setting was missed

One platform and one hardware brand, whether it suits you or not

With Advanced TMS

A Perth-based team you can call directly, with a named contact

Buy, rent or hire short term, with no lock-in

Itemized quotes tailored to your fleet, usually within one business day

Experienced installers who know WA mine site standards, with every job checked by us

Every unit tested and documented before the vehicle leaves

Hardware chosen for your vehicles, sites and coverage

Support

Support that picks up the phone

Customer support is the reason most of our clients came to us, and the reason they stay. You deal with the same small team from the first quote to the hundredth service call, wherever in Western Australia your vehicles are working.

Same day

Response during business hours

A real person, usually within a few hours, not a ticket queue. Urgent site access issues go to the top of the list.

1

Named contact for your fleet

Someone who knows your vehicles, your sites and your reporting, so you never explain it twice.

WA

Regional install network

Workshop installs in Wangara, plus trusted regional installers across WA. We coordinate every job and check it is done to our standard.

$0

Platform training

Hands-on training for your supervisors and admin staff, in person or online, whenever you add new people.

How it works

From quote to site-ready

No long onboarding projects. A clear path from your first call to vehicles
reporting on site.

1

Tell us the site

Vehicle types, numbers and the sites they are going to. We confirm the current access standard.

Day one

2

Itemised quote

Hardware, installation, monitoring and travel, listed line by line. Buy, rent or hire.

Within one business day

3

Install and test

Fitted at our Wangara workshop or on site through our regional installers, configured to the site specification and tested end to end.

Within 14 days, often sooner

4

Sign-off and training

Compliance documents for the site, platform logins and training for your team. Then we stay in touch.

Ongoing

Industries

Fleets we look after

Mining and resources

Mine-spec IVMS and DFDM for contractor and owner fleets, light vehicles through to haul support.

Civil construction

Tracking for utes, trucks and plant across multiple project sites, with engine hours and theft alerts.

Transport and logistics

Chain of Responsibility records, fatigue monitoring and road-facing cameras for line haul and local delivery.

Oil, gas and energy

Remote support fleets with satellite tracking and journey management.

Government and utilities

Field service fleets with driver safety reporting, FBT logbooks and after-hours use alerts.

Equipment hire

Short-term IVMS and DFDM hire so your vehicles are site-ready the day they go out.

Our clients

What fleet managers tell us

“

[Replace with a real client quote, ideally one that mentions support or a vehicle getting through site access first time.]

[Name]

[Role], [Company]

“

[Replace with a real client quote, ideally one that mentions support or a vehicle getting through site access first time.]

[Name]

[Role], [Company]

“

[Replace with a real client quote, ideally one that mentions support or a vehicle getting through site access first time.]

[Name]

[Role], [Company]

FAQ

Questions we get asked on site

Cannot see your question? Talk to someone who installs these systems.

0495 033 867

IVMS stands for In-Vehicle Monitoring System. It records where a vehicle is, how it is being driven (speed, harsh braking, harsh acceleration, cornering, seatbelt use and rollover events) and who is driving it. Most WA mine sites require an approved IVMS in every light and heavy vehicle before it is allowed through the gate.

Yes. We configure every system to the access specification of the site the vehicle is going to, including Tier 1 miner IVMS and DFDM standards. We supply the configuration and install documentation your site contact needs to sign the vehicle off.

DFDM is Driver Fatigue and Distraction Monitoring. An infrared camera faces the driver and detects eye closure, microsleeps, yawning, head position and phone use. The driver receives an in-cab alert immediately, and a short video clip is sent to the supervisor for review. It works day and night, including through most sunglasses.

Yes. Vehicles can be fitted at our Wangara workshop, and for vehicles already working in regional WA we coordinate installs through our network of regional installation partners. Every install is configured, tested and documented to the same standard.

Units store every event and position while out of range and upload the full record once they reconnect, so nothing is lost. Where live tracking is required in remote areas, we fit satellite-enabled units that switch over automatically.

Yes. Short-term IVMS and DFDM hire is available for shutdowns, project work and hire vehicles. We can supply, fit and remove the units, and provide site compliance paperwork for the hire period.

No. You can buy hardware outright, rent it monthly or hire it short term. Our plans are designed to keep customers because the service is good, not because a contract says they have to stay.

Yes. Trip, speed and driver records support Chain of Responsibility obligations, and distance and location reports can be used for fuel tax credit claims and FBT logbooks.

Get your fleet site-ready

Tell us what you run and where it is going. You will get an itemized quote, usually within one business day, from someone who knows the site standard.

Call us

0495 033 867

Workshop

Unit 6, 19 Volcanic Loop, Wangara WA 6065

Request a quote

Takes about a minute. No obligation.